When your package arrives, unpack and assemble your HoseBeGone. Be sure to read through the instructions as there are many good tips you need to be aware of for a good night's sleep!

                
Unassembled                                            Assembled

The HoseBeGone works best when there is a gap between the mattress and box springs and the headboard or wall. Then it has a natural place for the hose to fall behind the mattress. Most bedframes allow for the box springs and mattress to be scooted away from the headboard or wall, allowing a gap of a few inches.

Measure your mattress thickness and add about 15 inches. If you don't have a ruler, most newer mattresses are about 17 inches tall, so if you are not sure try about 32 inches to start. This should be the ideal height you need for proper use of the HoseBeGone. This height assumes standard bedding. Build your hose be gone (including the circular support arm) to the height of the mattress plus about 15 inches...determine which parts you need to achieve this height.

Slide the HoseBeGone between your mattress and box springs with the stem of the base directly behind where your head rests when you sleep. We suggest you slide the base by itself and add the vertical extensions later. If you install it assembled, be carefull because the swiveling circular arm can swivel and it could hit you if, you are not careful.

Slide your CPAP hose and/or Canula through the Circular Support Arm, attach your mask and you are ready for bed!